检测仪器主要用到的ISO标准有哪些？

ISO 15106-3-1996

Plastics － Film and sheeting － Determination of water vapour transmission rate － Part 3: Electrolytic detection sensor method

ISO 15106-2-1996

Plastics － Film and sheeting － Determination of water vapour transmission rate － Part 2: Infrared detection sensor method

ISO 15106-1-1996

Plastics － Film and sheeting － Determination of water vapour transmission rate － Part 1: Humidity detection sensor method

ISO 15105-1-2003

Plastics － Film and sheeting － Determination of gas-transmission rate － Part 1: Differential-pressure method

ISO 15105-2-2003

Plastics － Film and sheeting － Determination of gas-transmission rate － Part 2: Equal-pressure method

ISO 11501: 1995

Plastics － Film and sheeting － Determination of dimensional change on heating

ISO 8295-1995

Plastics － Film and sheeting － Determination of the coefficients of friction

ISO 7765-1: 1988

Plastics film and sheeting － Determination of impact resistance by the free-falling dart method Part 1: Staircase methods

ISO 6383-2: 1983

Plastics － Film and sheeting － Determination of tear resistance － Part 2: Elmendorf method

ISO 2759: 2001

Board － Determination of bursting strength

ISO 2556-2001

Plastics － Determination of the gas transmission rate of films and thin sheets under atmospheric pressure － Manometric method

ISO 2528

Sheet materials － Determination of water vapour transmission rate － Gravimetric (dish) method

ISO 534: 1988

Paper and board － Determination of thickness and apparent bulk density or apparent sheet density

ISO 11897:1999

Packaging － Sacks made from thermoplastic flexible film － Tear propagation on edge folds

ISO 11502:1995

Plastics － Film and sheeting － Determination of blocking resistance

SO 11339:2003

Adhesives － 180 ° peel test for flexible-to-flexible bonded assemblies (T-peel test)

ISO 9932:1990

Paper and board － Determination of water vapour transmission rate of sheet materials － Dynamic sweep and static gas methods

ISO 9913-2:2000

Optics and optical instruments － Contact lenses － Part 2: Determination of oxygen permeability and transmissibility by the coulometric method

ISO 9913-1:1996

Optics and optical instruments － Contact lenses － Part 1: Determination of oxygen permeability and transmissibility with the FATT method

ISO 9237:1995

Textiles － Determination of the permeability of fabrics to air

ISO 8510-2:1990

Adhesives － Peel test for a flexible-bonded-to-rigid test specimen assembly － Part 1: 180 ° peel

ISO 8510-1:1990

Adhesives － Peel test for a flexible-bonded-to-rigid test specimen assembly － Part 1: 90 ° peel

ISO 8317:2003

Child-resistant packaging － Requirements and testing procedures for reclosable packages

ISO 8296:2003

Plastics － Film and sheeting － Determination of wetting tension

ISO 7765-2:1994

Plastics film and sheeting － Determination of impact resistance by the free-falling dart method － Part 2: Instrumented puncture test

ISO 7765-1:1988

Plastics film and sheeting － Determination of impact resistance by the free-falling dart method － Part 1: Staircase methods

ISO 7231:1984

Polymeric materials, cellular flexible － Method of assessment of air flow value at constant pressure-drop

ISO 7229:1997

Rubber- or plastics-coated fabrics － Measurement of gas permeability

ISO 6452:2000

Rubber- or plastics-coated fabrics － Determination of fogging characteristics of trim materials in the interior of automobiles

ISO 5725-1:1994

Accuracy (trueness and precision) of measurement methods and results － Part 1: General principles and definitions

ISO 5636-5:2003

Paper and board － Determination of air permeance and air resistance (medium range) － Part 5: Gurley method

ISO 5636-3:1992

Paper and board － Determination of air permeance (medium range) － Part 3: Bendtsen method

ISO 5636-1:1984

Paper and board － Determination of air permeance (medium range) － Part 1: General method

ISO 4638:1984

Polymeric materials, cellular flexible － Determination of air flow permeability

ISO 4591:1992

Plastics － Film and sheeting － Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)

ISO 4589-3:1996

Plastics － Determination of burning behaviour by oxygen index － Part 3: Elevated-temperature test

ISO 4589-2:2000

Plastics － Determination of burning behaviour by oxygen index － Part 2: Ambient-temperature test

ISO 4589-1:1996

Plastics － Determination of burning behaviour by oxygen index － Part 1: Guidance

ISO 3034:1975

Corrugated fibreboard － Determination of thickness

ISO 2782:1995

Rubber, vulcanized or thermoplastic － Determination of permeability to gases

ISO 2758:2001

Paper － Determination of bursting strength

ISO 1974:1990

Paper － Determination of tearing resistance (Elmendorf method)

ISO 1663:1999

Rigid cellular plastics － Determination of water vapour transmission properties

ISO 483:1988

Plastics － Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value

ISO 306:2004

Plastics － Thermoplastic materials － Determination of Vicat softening temperature (VST)

ISO 75-3:2004

Plastics － Determination of temperature of deflection under load － Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics

ISO 75-2:2004

Plastics － Determination of temperature of deflection under load － Part 2: Plastics and ebonite

ISO 75-1:2004

Plastics － Determination of temperature of deflection under load － Part 1: General test method

ISO 139-2005

Textiles - Standard atmospheres for conditioning and testing

ISO 527.2-1993

Plastics; determination of tensile properties; part 2: test conditions for moulding and extrusion plastics

ISO 2234-2000

Packaging - Complete, filled transport packages and unit loads - Stacking tests using a static load

ISO 3290-2001

Rolling bearings - Balls - Dimensions and tolerances

ISO 4593-1993

Plastics; film and sheeting; determination of thickness by mechanical scanning

ISO 6922-1987

Adhesives; Determination of tensile strength of butt joints

ISO 7965.2-1993

Sacks - Drop test - Part 2: Sacks made from thermoplastic flexible film

ISO 8980.5-2005

Ophthalmic optics - Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant

ISO 9073.10-2003

Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state

ISO 11607.1-2006

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems

ISO 11607.1-2006

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems

ISO 11607.2-2006

Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes

ISO 12048-1994

Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester

ISO 13468.1-1996

Plastics - Determination of the total luminous transmittance of transparent materials - Part 1: Single-beam instrument

ISO 13468.2-1999

Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument

ISO 13468.2-1999

Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument

ISO 14268-2002

Leather - Physical and mechanical tests - Determination of water vapour permeability

ISO 14782-1999

Plastics - Determination of haze for transparent materials

ISO 15119-2000

Packaging - Sacks - Determination of the friction of filled sacks

ISO 15359-1999

Paper and board - Determination of the static and kinetic coefficients of friction - Horizontal plane method

ISO Guide 30-1992

Terms and definitions used in connection with reference materials