众志检测仪器
电池试验设备
模拟环境试验设备厂商
专注于 锂电池 新能源电动汽车 模拟环境可靠性试验设备
电池试验设备联系方式:0769-88800078
4产品中心
您的位置: 首页 ->  产品中心
电池针刺试验机

电池针刺试验机

 详情说明
产品参数

试验应在20℃的环境温度下进行,将接有热电偶的电池(热电偶的触点固定在电池大表面上)置于通风橱中,用直径2~8mm的无蚀锈钢针以10mm/s~40mm/s的速度 刺穿电池最大表面的中心位置,并保持任意时间。

The test should be carride out in the environment at 20℃. Put the battery connected to thermocouple (with contacts fixed to th large surface of the battery) in the hood, penetrate the of the largest surface of the battery with 2~8mm diameter stainless steel needle at 10~40mm/s speed, and maintain any time.

符合标准
  1. GB/T 31241
  2. GB/T 31486-2015
  3. GB/T 31485-2015
  4. GB/T 31484-2015
  5. GB/T 31467.1-2015
  6. GB/T 31467.2-2015
  7. GB/T 31467.3-2015
  8. QC/T 741-2014等
技术参数 Technical parameter(ψ2mm~ψ8mm的耐高温钢针,长度可根据客户要求定制)
设备型号 Equipment 测试空间 Test space(mm)
型号 Mode CZ-ZC-1
针尖距离下部距离 放电池的平面200m Plane for the battery is 200mm
可夹距离 200mm
针刺速度 以10~40mm/s的速度,从垂直于蓄电池极板的方向贯穿(钢针停留在蓄电池中) Penetrate in the direction perpendicular to the battery plate at 10~40mm/s speed (needle stays in the battery)
最大贯穿力 Maximum penetration force 200kg
力量显示 strength display 压力传感LED显示 Pressure sensor LED display
行程 Stroke 200mm
驱动方式 Drive 气缸驱动 Cylinder dirve
夹持方式 手动夹持或拨动夹持 Manual or pneumatic clamping
箱体结构 Box structure 做成箱式设备装置防爆、防火、抗腐蚀、易清理 Made into box-type equipment, explosion-proof, fireproof, corrosion-resistant, easy to clean.
防爆箱材质 Material of explosion-proofbox 镀锌板烤漆处理 Galvanized plate baking varnish processing
重量 Weight 约(about) 75kg
电源要求 1ψ 220V/50Hz

产品详情图
请联系我们提供,谢谢 上一个产品:电池挤压试验机      下一个产品:动力电池针刺试验机
东莞市赛测试验设备有限公司 东莞市赛测试验设备有限公司 Copyright © 2012 版权所有 【BMAP粤ICP备2021164652号