型号Model | CZ-KX-2 |
烤箱温度 Oven temperature | 常温 ~ 150七(任意设定)room-temperature -1 SOXlfarbitrary) |
烤箱外形尺寸(mm)(LxWxH) Oven dimensions | 1000x1000x1900 |
内胆规格(mm)(LxHxD) Tank soecifications | 660x300x750 |
工作电压Working voltage | 380V/AC |
烤箱机组总功率Total oven power | 3*4.5KW |
内胆温度误差Interior temperature error | 士2七 |
加热时间Heating time | 空箱1 小时内升温到90tempty box within 1 hour to heat up to 90 七 |
表面温度Surface temperature | 设备在150七工作时表面不超过40七 the device works, the surface shall not exceed 150tto 40 七 |
温度均匀度 Temperature uniformity | 设备出厂前在内胆内部采取9个点来检验温度均匀性,内胆与显示温度 能控制在 ±2七以内equipment factory in the tank within 9 points to test the temperature uniformity, liner and display temperature control ± 2 or less |
安全保护装置 Safety protection device | 具有高温报警功能,自动超温报警;具有断电自动保护功能with a high temperature alarm,automatic over-temperature alarmjcut it out with the automatic protection function |
框架材料Frame material | 优质厚冷轧板制作making quality thick cold rolled plate |
内腔材料Cavity material | 全部采用3mm厚不锈钢制作3mm whole of stainless steel |
电控器件Electronic control devices | 采用固态继电器控制,品牌电器配件制作using solid state relay control, brand electric fittings production |
烘烤方式Baking | 发热管包围内胆热辅射式加热surrounded by heat tube liner Refu-fired heating |
真空保持时间Vacuum hold time | 在10Pa情况下24小时不高于500Pa No more than 500Pa for 24 hours under 10 Pa condition |
真空度Vacuum | 10Pa |
控制方式Control | 3个工作室单独工作,3套温控系统,独立加热,既可单独工作也可同时工作.电磁阀控 制真空、氮气的开关,停电时真空密封良好.各工作室可单独抽真空、单独充氮气, 互不膨响 a Studio to work alone, 3 set temperature control system,independent heating, either working alone or at work. Solenoid valve control switch of the vacuum nitrogen, when the power vacuum sealing. The Studio individually vacuum, nitrogen alone, without affecting other |
真空烘箱